Savant SSA-3220, Руководство пользователя

Страница: 8 / 30

3.2.2. Front Panel Capabilities
1 2 3
4
1 Reset (hole) Press & Hold the reset button for 5+ seconds.
Resets to static IP address.
2
Power
(LED)
Green indicates the system has adequate power and is operating normally.
Red indicates the system is in stand-by mode. In standby most of the Controller circuitry
is powered down.
Off indicates that the system is getting no power.
3
Status
(LED)
Green indicates the host has established communications with the embedded system.
Green flashing indicates the embedded system is ready, but no communication has
been established with the host.
Off indicates the embedded processor is resetting or is powered up; and is booting the
embedded firmware.
Red indicates the host has determined the firmware needs to be updated, but a problem
occurred during the process that will initiate a reset.
Red flashing indicates the embedded firmware is running, but has not received a
DHCP IP Address.
Amber indicates the host is currently updating the embedded firmware.
Amber flashing indicates the embedded system has a valid link-local IP Address, and
is waiting to connect to the host.
Hardware Failure : If a hardware failure occurs, the Status LED indication will be
interrupted every three seconds with a solid red indication. For example, if the LED is
flashing green when a hardware failure occurs, the LED will alternate between flashing
green and solid red at three-second intervals.
4
On/Off
button
(hole)
Insert pin into hole for about 10 seconds to place in standby mode. The Power button
turns red. Insert the pin again for about one second to take the system out of standby
mode. The power button turns green. The I /0 power switch on the back of controller
must be On ( I ) to enable this function. To turn the power off for the entire system, use the
switch on the rear panel.
Savant ® SmartAudio Matrix Switch Blueprint Deployment Guide Savant ® SmartAudio Matrix Switch Blueprint Deployment Guide Savant ® SmartAudio Matrix Switch Blueprint Deployment Guide Savant ® SmartAudio Matrix Switch Blueprint Deployment Guide Savant ® SmartAudio Matrix Switch Blueprint Deployment Guide Savant ® SmartAudio Matrix Switch Blueprint Deployment Guide
009-1067-03 140806 8 of 30