Installed on SDE using Savant Application Manager (SAM)
1.
On the SDE open the Savant Application Manager.
2.
In the list of available da Vinci versions, select the version that matches the Blueprint configuration running on the
host. Select
Activate
to make it the active version.
Note:
If the version running on the host is not in the list, see the SAM Deployment Guide for information on how to
install it before proceeding.
3.
Open the rpmEmbscanner using the toolbar:
Launch>rpmEmbscanner
4.
Select the device to edit in the list, and click
Edit
.
Select the device to Edit
Click Edit
5.
In the open settings tray, set
Configure
to Manually, enter the IP address, and press the tab key. The Subnet
Mask, and Router will populate automatically.
Set Configure to
Enter IP Address
Click Save & Reboot
6.
Click
Save & Reboot
. After a short period of time, the controller will come back online with the new IP Address.
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
009-1067-03 140806
28 of 30
