TB-BA-e-1713
3
This coating thickness gauge is small in size, light in weight and easy to carry. Al-
though it is complex and advanced, it is convenient to operate. Its ruggedness will
allow many years of use if all the instructions are followed carefully.
Please keep this instruction manual always within reach!
Annotation: It is strongly recommended to adjust the new instrument before
the first use, as described in paragraph 9. By doing this, you will achieve a
much better measurement result right from the start.
1 Features
» This instrument meets the standards of both, ISO 2178. It is suitable for the labora-
tory and for use in “harsh field conditions”.
» The F-mode measures the coating thickness of nonmagnetic materials, e.g. paint,
plastics, porcelain enamel, copper, zinc, aluminium, chrome, lacquer layers, galva-
nised or phosphorescent coatings, alloy etc.
These layers should be located on magnetic metals e.g. steel, iron, nickel etc.
» In N-mode, the coating thickness of nonmagnetic coatings can be measured, which
is located on nonmagnetic metals. It is used to measure anodizing, varnish, paint,
enamel, plastic coatings, powder coatings etc. These layers should be located on
nonmagnetic metals e.g. aluminium, brass, nonmagnetic stainless steel and others.
» Automatic „Power-off“to preserve batteries
»Selectable units: mm, µm, inch (mil)
»Display with backlight enables exact reading of the measurement results.
2 Specifications
Display: 4 digits, 10mm LCD, with backlight
Measurement range: 1000
μm and 2000µm
Resolution: 0,1 µm (0 bis 99,9 µm), 1 µm (100 µm bis 1000µm
bzw. 2000µm beim TB 2000-0.1F)
Accuracy:
Following accuracy is given for the models TB 1000-0.1F, TB 1000-0.1N as well as
TB 1000-0.1FN:
