sauter SlabMatrix Basic 1.0, Руководство пользователя

Страница: 60 / 88

Routing and drilling device
60
Figure 77: Mounting frame closed to the rear
Move the frame with the cross rails
backwards until the beams touch the
end of the longitudinal rails. Now fix
both longitudinal rails at the back as well
(3. /4.).
Expert tip:
In order to optimise the play in the
guides, the clamping of the beams or the
fixation on the working plate can be
loosened slightly and the longitudinal /
cross rails can be pushed slightly inwards
or outwards. Then fix them again. Fi-
nally, make sure that the guides slide
well.
Result: Once all the clamps have been loosened, the mounting frame can be moved easily to
the left and right (X-axis) and forwards and backwards (Y-axis).
4. Step:
Mounting the dust and chip brushes (Art. No. SA-SM-BRUSH-KIT)
Figure 78: Dust and chip brushes
Insert the brushes between the mount-
ing frame and the pre-assembled base
plate and clamp the brushes with the
hexagon socket screws.
Result: The mounting frame is prepared for inserting the router.