sauter FL, Инструкция по эксплуатации

Страница: 3 / 21

FL-BA-e-2020 3
1
Introduction
Please read these operating instructions carefully before commissioning, even if you
already have experience with SAUTER measuring instruments.
After receipt of the force gauge, it should be checked in advance that no transport
damage has occurred, that the outer packaging, the plastic housing, other parts or
even the gauge itself have not been damaged. If any damage is evident, please
notify SAUTER GmbH immediately.
The FL can measure tensile and compressive forces very accurately and it is easy to
operate. It can be held in the hand for measurements or mounted on top of a suitable
test stand.
SAUTER offers optional software and accessories to make the measuring instrument
more versatile in use. Please ask SAUTER or the SAUTER supplier or visit our
website
www.sauter.eu.
2
Scope of delivery
•
SAUTER FL, incl. internal battery
•
Transport case
•
Battery charger
•
5 pieces M3 x 8 screws for mounting on SAUTER test benches
3
Additional information when using the AFH software
If you want to connect an FL with the combination test bench and software (AFH-LD
or AFH-FD) to a PC, you must connect the FL to the equipment port of the test bench
via the FL-A04 cable (Sub-D 9-pin to PS2) and connect the test bench to the PC via
the computer port.