Step 11
å
Fasten the BRACE (H) to the BOTTOM MOLDING (P) and
SKIRT (N). Use six BROWN 1" FLAT HEAD SCREWS (12S).
å
Fasten the BRACE (H) to the PLINTHS (T). Use four
BLACK 1-1/4" FLAT HEAD SCREWS (7S).
412015
www.sauder.com/services
Page 16
Sur
face with mor
e holes
H
N
T
T
P
HALF DISK (U)
HALF DISK (U)
The unfi nished edge of the
BOTTOM MOLDING should
be against the SKIRT.
These edges
should be even.
BLACK 1-1/4" FLAT HEAD SCREW
(4 used for the PLINTHS)
7S
BROWN 1" FLAT HEAD SCREW
(6 used in this step)
12S
These edges
should be even.
