Step 9
å
Fasten the OUTER RIGHT END (A) to the RIGHT MOLDING (R).
Tighten two TWIST-LOCK® FASTENERS.
å
Insert two METAL PINS (1R) into the INNER RIGHT END (C3).
å
Fasten the INNER RIGHT END (C3) to the TOP (E2). Tighten two
TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the METAL PINS in the INNER RIGHT END insert
into the holes in the TOP.
412015
www.sauder.com/services
Page 14
The surfaces with theTWIST-LOCK
®
FASTENERS should be facing inside.
A
C3
R
E2
1R
