å
Fasten the LEFT END (B) to the LEFT MOLDING (R) on
the TOP (E). Tighten two TWIST-LOCK® FASTENERS.
å
Insert four METAL PINS (JJ) into the TOP (E).
å
Push the UPRIGHTS (C and D) onto the METAL PINS (JJ)
in the TOP (E).
Step 5
411864
www.sauder.com/services
Page 9
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
6-3/4"
7-5/8"
Finished edge
B
C
D
E
R
JJ
JJ
Sur
face with
6 holes
Sur
face with
12 holes
Sur
fac
e wit
h T
WIST
-LO
CK
®
FA
ST
EN
ER
S
Rounded edge
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
