å
Carefully turn your unit over onto its front edges. Unfold
the BACK (G) and lay it over your unit.
å
Line up the bottom edge of the BACK (G) with the
BOTTOM (F), then push on opposite corners of your unit
if needed to make it “square”.
å
Fasten the BACK (G) to your unit using the NAILS (TT).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the UPRIGHTS (C and D).
å
NOTE: Perforations have been provided for access
through the BACK. Carefully cut out the holes needed.
Step 15
411864
www.sauder.com/services
Page 19
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished sur
face
NAIL
(36 used in this step)
TT
F
G
This perforation should be
closer to the BOTTOM (F).
The holes must line up over
the UPRIGHTS (C and D).
