Flow Gauge & Control
Tool speed can be controlled by the flow control knob located above the "Slower/Faster" placard. The flow can be read
directly from the flow meter located on the instrument panel. Flow is indicated in liters per minute (LPM) and gallons per minute
(GPM). For most applications full flow is recommended. Some tools, however, require specific flow rates for optimal perform-
ance. This information should be available from the tool manufacturer's documentation. Sauber Retrievers can be operated at
flows up to 20 GPM and therefore can be run at full flow. If oil flow is at or near 0 GPM rotate the flow control clockwise until de-
sired flow is restored. If flow does not respond, check the hydraulic oil level in the tank and ensure that the unit is not being op-
erated on a slope exceeding 10 degrees. Finally, check the condition of the pump.
Components Sourcing Information
Item................................Source....................Description / Specification
Pump..........................................Rexroth..........................S16S-7 - 2250 PSI . 81 cu-in displ
Engine........................................Kawasaki........................16872, 22.5HP
Spark Plug..................................Kawasaki........................BMR6A
Engine Oil Filter..........................Kawasaki........................49065-2071
Fuel Filter...................................Kawasaki........................49019-1055
Foam Breather Element.............Kawasaki........................11013-2114
Paper Breather Element............Kawasaki........................11013-2115
Parts Manual..............................Kawasaki........................99910-A826-00
Service Manual..........................Kawasaki........................99924-2041-01
Tank Base..................................Sauber...........................1010-01 18 Gallon
Tank Cover.................................Sauber...........................1010-02 Almag - Machined for Kawasaki
Gasket Compound.....................Form-A-Gasket..............Silicone Blue
Key Switch.................................Pollak.............................33-104
Pressure Relief Block.................Catching.........................112989-DV
Flow Meter.................................Headland........................601-010
Panel Light.................................Truck Lite.......................15009
Hour Meter.................................Veeder Root...................87F-1091Oil Cooler
Swirl Cool
10618S-1
Control Panel.............................Sauber...........................1010-03 Engraved Poly
Quick Couplers...........................Pioneer...........................8010-4/4050-4 1/2" NPT
Pump Coupler............................Browning........................L-095 x 5/8"
Engine Coupler..........................Browning........................L-095 x 1"
Coupler Insert.............................Browning........................L-090/095
Throttle / Choke..........................Morse Control................438220-003-60
Sump Strainer............................Flow-Easy......................P-20-1.25 NUT-100-RV3
Filter Housing.............................Gresen...........................FSP-107IEDNX
Filter Element.............................Gresen...........................CL-22001
Sight Gauge...............................Lube Devices.................HSG-55
Pressure Gauge.........................Headland........................MPG-1-P-5000E
Back Pressure Gauge................Gresen...........................C112
Filler/Breather.............................Filtration Prod.................BF12
Hydraulic Oil...............................Citgo...............................# 32 Anti-Wear Premium
Motor Oil.....................................Citgo...............................10W-30W All Season
Operation & Maintenance Manual
Model 1570-B Puller
09/2010
Page 17
