SATO CT 412i, Руководство оператора

Страница: 18 / 73

Unit 2: Technical Data
CT4i Operator’s Manual
2-9
UNIVERSAL SERIAL BUS (USB)
The Universal Serial Bus (USB) interface is a Plug-In Interface Module that can be installed by the user. It requires
a driver (shipped with each printer that has the interface installed) that must be loaded onto the PC and configured
to support USB peripherals using Windows 2000 or above. Details for loading the USB driver are contained in the
USB Interface Manual that is shipped with each printer with a USB Optional interface installed. Up to 127 devices
may be connected to a USB port using powered hubs.
BLUETOOTH
The Bluetooth interface on the CT4i printer complies with the Bluetooth 1.1 Class 2 standard. The Bluetooth
interface and the printer are connected by a serial interface at a transfer rate of 115200bps.
ATTENTION: This Interface Type Is Not Compatible With Windows 98 Or Windows Me.
SPECIFICATIONS
Printer Connector USB Type B Plug
Connector Pin Assignment Pin 1 (VBus), Pin 2 (D- or -Data), Pin 3 (D+ or +Data), Pin 4 (GND)
Cable 5 M or less (Twisted Pair Shielded)
Host Windows 2000 or above with USB Port
Power Supply BUS Power through cable
Power Consumption +5 V at 80 ma
SPECIFICATIONS
Profile Serial Port Profile (virtual serial port is established and two devices compatible with
Bluetooth are connected.)
Operation Mode Slave Mode
Interface Type selection Turn DSW8 to OFF for extended interface (DSW8 = ON is for USB/RS-232C/IEEE1284)
Security Mode - Level 1 No authentication
- Level 2 PIN code authentication, Service level, No encryption
- Level 2 PIN code authentication, Service level, Encryption
- Level 3 PIN code authentication, Link level
Packet Type DM5
PIN Code 16-digit ASCII code
Power Saving Mode sniff, park, hold
Communication TimeOut/Retry 10 seconds (fixed)/1 second (recommended retry value)
Code ASCII (7 bits), Graphic (8 bits)
SR mode value R1