SATO KEIRYOKI SK-1110, Инструкция по эксплуатации

Страница: 8 / 16

6
Measurements
(1) Connect the sensor probe with a type "K" thermocouple connector to the main unit.
Align the positive (+) and negative (-) sides of the plug of the sensor probe with those of
the connector receptacle on the main unit. The sensor probe SK-K010 provided as a
standard accessory is designed to measure a temperature within the range of -50°C to
300°C. Make sure to use the probes within this range of measurement temperature.
Fully insert the plug
NB.
Be sure to use a type "K" thermocouple sensor and its proper connector. Do not use
other types of thermocouple sensor proves to ensure accurate temperature measurements.
(2) Press the PWR key to turn on the main unit.
Upon initial power-on of the SK-1110, the LCD displays all the elements for about one
second before the measurement mode starts.
NB
: When the sensor is not connected to the main unit, the LCD displays an "-------"
(3) You can avoid the influence of ambient temperature around the protection tube by
inserting the sensor probe into the target (regardless of whether gas, liquid or solid) to
approximately “15 times the diameter of the protection tube” from the end of the sensor
protection tube (approximately 35 mm for the SK-K010).
(4) Press the PWR key to turn off the main unit.
CAUTIONS
 Take care not to get burned when measuring high temperatures.
 The measurement accuracy may be affected when the ambient temperature is abruptly
changed. Allow the SK-1110 to acclimatize to the ambient temperature before starting
the measurements. When precision measurements are required and if the SK-1110 is
brought into an atmosphere with a temperature difference of 10°C or more, leave them in
the new atmosphere for at least 30 minutes before starting the measurements.
Indication hold function
Press the HOLD key to hold the indication. This is useful for easy reading when the indication
changes rapidly during measurements. Pressing the HOLD key again will release the
indication hold function.