SATELLINE-3AS and SATELLINE-3ASd
27
6.1.2
Output power and sensibility
The Tx output power level and Rx sensitivity level can be changed in position 2.
Enter selection >2
Radio setup
-----------
1) Tx Power Level 1000 mW
2) Rx Sensitivity Level -110 dBm
Enter selection or Esc to cancel >1
Power setup
-----------
TX Power level 1000 mW
1) Set 10 mW
2) Set 20 mW
3) Set 50 mW
4) Set 100 mW
5) Set 200 mW
6) Set 500 mW
7) Set 1000 mW
Enter selection or Esc to cancel >6 OK !
Enter selection or Esc to cancel >2
Sensitivity setup
-----------------
RX Sensitivity level –110 dBm
Enter new value (80 – 118) or Esc to cancel > -115 OK !
NOTE !
Setting the radio data modem into power level other than those specified by the local
authorities is strictly forbidden. The use of non-approved power level can lead to prosecution
by them. SATEL is not responsible for any illegal use of its radio equipment.
