Satel INT-TSG2, Быстрое руководство пользователя

Страница: 8 / 14

6 INT-TSG2 SATEL
Fig. 2. User home screen (keypad with factory default settings).
The user screen includes:
•
status bar (see p. 7),
•
widgets used to operate the alarm system, indicate the alarm system status, etc.
(see “Widgets” p. 7).
To run a function with a widget, you may be required to enter a code. If this is the case,
the keypad will be displayed (see p. 8). When you enter the code, the function will be run and
you will be logged in. If you are already logged in, you will not be required to enter your code
again when trying to run a function with a widget.
The following widgets are available on the user home screen in the keypad with factory
default settings.
tap to arm in mode “full”.
tap to:
•
INTEGRA system: arm in mode “without interior”,
•
VERSA system: arm in mode “day”.
tap to:
•
INTEGRA system: arm in mode “without interior and without entry delay”,
•
VERSA system: arm in mode “night”.
tap to disarm / clear alarm.
tap and hold for 3 seconds to trigger the panic alarm. The installer defines whether
the alarm triggered will be loud (signaled by the alarm system) or silent (without
signaling).
tap and hold for 3 seconds to trigger the fire alarm.
tap and hold for 3 seconds to trigger the medical (auxiliary) alarm.
tap to view the message.