SATEL
INT-TSG2
7
Consult the installer about which additional widgets may help you to operate the alarm
system or control the home automation devices connected to the control panel.
Only the installer can create new user screens, add widgets to the screen, etc.
The installer can configure the keypad so that the access to the user screen is code-
protected (a keypad will open before the screen is displayed).
Two different background pictures may be applied to user screens.
5. Additional screens
Additional screens differ from the user screens only in that each of them can have a different
background picture. For this reason, the additional screens may be used to display site plans.
If pictures other than the ones offered by SATEL are to be displayed, the installer must save
them on a memory card and install the card in the keypad.
To display an additional screen, tap a link widget.
Fig. 3. Screen with a site plan (example).
6. Status bar
The status bar is displayed on the top of the user screen and the additional screen.
It includes:
•
screen title (optionally, if added by the installer),
•
time,
•
the
icon. If you are not logged in, tap the icon to log in (keypad will open – see p. 8).
If you are logged in, tap the icon to log out or go to the user menu.
7. Widgets
The following widgets may be displayed on the screen.
Text
– the widget displays any text that was added by the installer or system element name.
Partition status
– the widget displays the partition status represented by icons.
Zone status
– the widget displays the zone status represented by either:
– icons selected by SATEL (indicator) – different statuses are displayed,
– text messages (text) – messages inform only about normal and violated states,
– icons selected by the installer (icon) – only normal and violated states are displayed.