6
Partition keypad
CA-64 S SATEL
Figure 3
LOCK
ON if partition armed - When this option is marked, the relay operates in a bistable way
(active when the partition is armed and normal when it is disarmed).
NOTE:
When the relay operates in this mode, it changes the status automatically, if
the partition has been disarmed from this partition keypad. However, if the
partition has been disarmed from another keypad, the relay changes its status
after CODE is entered and the key
9
is pressed at its partition keypad.
Fixed ON time – This option sets the operation mode, in which the relay works in a
monostable way. After the user has called the door opening function (CODE
9
) the relay
will be activated for the time set in field the “Relay ON time:”, and then switches to its
normal status. Activation time period may be from 1 up to 255 seconds.
Fixed ON time – OFF if door open – The relay is active until the door is open (input IN
is disconnected from ground), but no longer than for the “Relay ON time”.
Fixed ON time – OFF if door closed - The relay is active for the duration of door
opening (input IN disconnected from ground), and it is de-activated when the door is
closed (input IN is connected to ground again), but the relay is active no longer than the
“Lock ON time”.
Relay – This option sets a way of relay contacts operation:
à
NO - normally contacts NO are open, they close when the relay is activated.
à
NC - normally contacts NO are closed, they open when the relay is activated.
Authorization control – opening of the door without using a card or chip (e.g. with a
key) will generate an „Unauthorized door opening” event, and may also be signaled on
the 93 (Unauthorized access) type output.
Alarm on unauth. access – unauthorized opening of a door when the partition to which
the module is assigned is in the armed mode will trigger alarm. Additionally the alarm
may be signaled at the output of 94 type (Alarm – unauthorized access).
