6 ASD-200
SATEL
3. Remove the battery.
4. Pull aside the mounting catches (Fig. 7) and remove the electronics board with the optical
chamber (Fig. 8).
5. Remove the cover from the thermistor (Fig. 9).
6. Pull aside the thermistor and its leads (Fig. 10).
7. Pull aside the mounting catch of the optical chamber (Fig. 11) and remove it (Fig. 12).
8. Using a soft brush or compressed air, clean the labyrinth in the cover, as well as the base
of the optical chamber, paying attention to the recesses where LEDs are installed.
9. Replace the cover of the optical chamber.
10. Place the thermistor leads in the respective grooves.
