50
Operating The PM295
To quit the sub-menu:
Ä
From the central window, press
ENTER
to return to the upper window.
Viewing and Changing the Setpoint Delays
To enter the delay sub-menu, select in the upper window the
dEL
entry with the
up/down arrow keys, then press the
SELECT
key. For information on delay
definition, see
Section 4.17.4
. The following illustrations show the sub-menu
windows:
dEL
Unit
1 S
Setpoint
condition
sub-menu
dEL
0
On d
Setpoint
action
sub-menu
dEL
0
OFFd
Delay
sub-
menu
To view the delay parameters:
Ä
From the central window, scroll through the list of parameters with the up/down
arrow keys. The lower window displays the current parameter setup.
To change the delay unit:
Ä
From the central window, select the
Unit
entry with the up/down arrow keys.
Ä
Press
SELECT
to choose the lower window.
Ä
Using the up/down arrow keys select
1 S
to specify delays in second units, or
0.1 S
to specify delays in 0.1 second units.
Ä
Press
ENTER
to return to the central window.
To change the delay value:
Ä
From the central window, using the up/down arrow keys, select
On d
to specify
the operate delay, or
OFF d
to specify the release delay.
Ä
Press
SELECT
to move to the lower window.
Ä
Adjust the delay value with the up/down arrow keys. The applicable range for
either delay is 0-9999.
Ä
Press
ENTER
to return to the central window.
To quit the sub-menu:
Ä
From the central window, press
ENTER
to return to the upper window.
