manualshive.com logo in svg

Satec PM130E, Инструкция по установке и эксплуатации

Поделиться
Скачать
Satec PM130E Скачать руководство пользователя страница 40

Chapter 5  Data Display 

33 

 

In the 

Display Mode

, the front panel display is updated 

approximately twice per second; you can adjust the display update 
rate via the 

Display Setup Menu

 (see Section 4.6). 

Tables 5-1 and 5-2 list all displayed parameters and their LED 
indicators.  

NOTES 

1.  The common measurements group does not have a designated 

indicator LED. If no indicator LED is lit up below the display, this means 
that the common measurement parameters are being displayed at this 
time. To return to the common measurements from another group, just 
press the same key that you used to display this group (the key pointed 
to by an illuminated LED).  

2.   When you move to another measurement group, the instrument stores 

your last location; when you return to the previous group, the 
instrument restores the last page. At power up, the instrument always 
returns to the common measurements group and shows you the last 
page that was displayed prior to loss of power. 

Selecting a Display Page 

 

 Press the up/down arrow keys to scroll through display pages.  

Selecting Common Measurements 

 

 Press the key pointed to by the illuminated round LED below the 

front panel display. If no LED is lit up, this means that the front 
panel displays the common measurements parameters.   
When Display Auto Scroll is in effect (see Section 4.6), the 
display will scroll automatically within 30 seconds after any of 
the following:  

• 

power up 

• 

returning to the common measurements display  

• 

pressing either arrow key  

  Press either arrow key to pause scrolling at the current page. 

Selecting Min/Max Measurements 

 

 Press the              key. Use the up/down arrow keys to scroll 

through Min/Max measurements.  

Selecting Energy Measurements 

 

 Press the              key. Use the up/down arrow keys to scroll 

through the different energy readings.  

Auto Return to the Main Screen 

If display Auto Return option is enabled (see Section 4.6), the 
display will automatically return to the main screen from any other 
measurement screen after 30 seconds of uninterrupted use.  

MAX/MIN

 

ENERGY

 

Содержание PM130E
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды