Satec C192PF8-RPR, Инструкция по установке и эксплуатации, Страница: 68 / 75

Chapter 7 Viewing Status Information 63
Chapter 7 Viewing Status Information
7.
Through the Status Information Menu (StA) , it is possible to view the status of various
instrument features.
7.1 The Status Information Menu
To enter the Status Information Menu :
From the display mode, press to enter the Primary Selection Menu .
Press to activate the StA window.
Press . .
To select a display page:
Press the up/down arrow keys to scroll through the display pages.
To quit the menu and return to the display mode:
Press or .
Front Panel Display
When you are in the Status Information Menu , the front panel display is updated
approximately four times per second and shows you a wide variety of status
information that you can review by scrolling through display pages.
The abbreviated labels in the upper and/or middle window designate the status
parameters. The upper window flashes, indicating that you are in the
Status
Information Menu display.
Fast Reset of Counters
When changing data via the front panel is not secured by a password, you can
reset the counters from the
Status Information Menu display without entering the
reset menu:
Select a display page where the counter you want to reset is displayed.
While holding the key, press and hold for about 5 seconds.
The displayed data is reset to zero.
Reset of Device Diagnostics
To clear the device diagnostics:
Select the Device diagnostics page.
While holding the key, press and hold for about 5 seconds
until the Err message is reset to None .
SELECT
StA
ENTER
SELECT
SELECT
ENTER
ENTER ESC
SELECT
ENTER
SELECT
ENTER