Chapter 4 Setup Menus
28
Operate delay }
}
}
}
Release delay }
The
delays before operation (
On d
) and release
(
OFFd
)
are set at 5 seconds and 10 seconds
respectively.
Setpoint action
The
action
to be triggered is operation of relay #1.
To select a setpoint:
Scroll to the desired setpoint using the up/down arrow keys.
To view the setup options for the setpoint:
Press to activate the middle window.
Use the up/down arrow keys to scroll to the desired setup option. The value
associated with this option is displayed in the lower window.
To change the selected setup option:
Press to activate the lower window.
Use the up/down arrow keys to scroll to the desired value.
Press to store the new value.
Press to leave the value unchanged.
To store your new setup for the setpoint:
From the middle window, press .
To quit the setpoint setup without changes:
From the middle window, press .
To quit the setpoints setup menu:
From the upper window, press or .
NOTES
1.
When you enter the setpoints setup menu at the protected level, monitoring of
setpoints is temporarily suspended until you return to the main setup menu.
2.
Each time you select a new trigger parameter, the operate and release limits are set
by default to zero.
3.
You will not be able to store your setpoint setup to the instrument if a setpoint action is
directed to a relay allocated for pulsing.
4.
The setpoint action directed to a relay output can be overridden using commands sent
via communications. A relay can be manually operated or released. When the relay
reverts to normal operation, it is automatically returned under setpoint control.
SP 1
5
On d
SP 1
10
OFFd
SP 1
rEL.1
Act
SELECT
SELECT
ENTER
ENTER
ENTER
ESC
ESC
ESC
Содержание C192PF8-RPR
Страница 2: ...C192PF8 RPR Power Factor Manager and Reactive Power Regulator Installation and Operation Manual ...
Страница 11: ...6 Chapter 1 Introduction Instrument Dimensions Figure 1 1 C192PF8 RPR Dimensions ...
Страница 14: ...Chapter 2 Installation 9 Figure 2 2 C192PF8 RPR Connections Rear View ...