manualshive.com logo in svg

Satec C191HM, Инструкция по установке и эксплуатации

Поделиться
Скачать
Satec C191HM Скачать руководство пользователя страница 4

 

i 

LIMITED WARRANTY 

The manufacturer offers the customer an 24-month functional warranty on the 
instrument for faulty workmanship or parts from date of dispatch from the 
distributor. In all cases, this warranty is valid for 36 months from the date of 
production. This warranty is on a return to factory basis. 

The manufacturer does not accept liability for any damage caused by instrument 
malfunction. The manufacturer accepts no responsibility for the suitability of the 
instrument to the application for which it was purchased. 

Failure to install, set up or operate the instrument according to the instructions 
herein will void the warranty. 

Your instrument may be opened only by a duly authorized representative of the 
manufacturer. The unit should only be opened in a fully anti-static environment. 
Failure to do so may damage the electronic components and will void the 
warranty. 

NOTE 

The greatest care has been taken to manufacture and calibrate your instrument. 
However, these instructions do not cover all possible contingencies that may 
arise during installation, operation or maintenance, and all details and variations 
of this equipment are not covered by these instructions.   

For additional information regarding installation, operation or maintenance of this 
instrument, contact the manufacturer or your local representative or distributor. 

IMPORTANT 

Please read the instructions this manual before performing installation, 
and take note of the following precautions: 

 

 

Ensure that all incoming AC power and other power sources are 
turned OFF before performing any work on the instrument.  Failure to 
do so may result in serious or even fatal injury and/or equipment 
damage.                                                                                                    

 

Before 

connecting the instrument to the power source, check the labels on 

the

 

side of the instrument to ensure that your instrument is equipped with 

the appropriate power supply voltage, input voltages, currents and 
communication protocol for your application. 

 

Under 

no circumstances should the instrument be connected to

 

a 

power

 

source

 

if it is damaged. 

 

To prevent 

potential fire or shock hazard, do not expose the

 

instrument to

 

rain or moisture. 

Содержание C191HM
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды