Satcube Ku, Руководство пользователя

Страница: 42 / 45

Satcube Ku User Manual v2.0-2019
SATCUBE PROPRIETARY
iDirect IQ200
The iDirect IQ200 has default IP-address 192.168.0.1 and to log in the defaults are
•
Username: admin
•
Password: iDirect
After Satcube configuration the IP-address is 192.168.222.222/29. Login credentials are either as
above or as follows:
•
Username: admin
•
Password: P@55w0rd!
All the transmission parameters in the IQ200 modem is set by your service provider by providing
option files. For the Satcube terminal to work well in an iDirect system the following parameters that
the service provider will need, to prepare the option files, are listed as either essential or helpful
parameters.
Essentials:
•
Modem Serial number
o
Found in the Modem GUI under Terminal information on the Dashboard page.
•
Terminal available LNB LOs: 10 GHz, 10.75 GHz, 11.3 GHz
•
Terminal available BUC LOs: 12.8 GHz, 13.05 GHz
•
OpenAMIP set to communicate with 192.168.222.219 on port 5005.
o
For more information about OpenAMIP see Appendix E.
•
Management port IP address 192.168.222.222/29.
•
DHCP enabled on the data port
o
This allows to disable manual IP settings in the terminal GUI and allows for smoother
terminal configuration and adds cloud check functionallity.
o
Allow at least three IP addresses with DHCP, one to modem, one to Satcube terminal
and one to end-user.
Helpful or recommended:
•
BUC 50W.
•
No frequency references needed from modem.
•
No DC power output needed from modem.
•
1dB compression point usually found at around -7 dBm.
After acquiring the option file/files from the service provider they should be uploaded to the modem
through the GUI. In the Administration tab, select Software and Configuration. Here you can upload
the corresponding option files. Here you can also upgrade the modem software.