Satcube Ku, Руководство пользователя

Страница: 28 / 45

Satcube Ku User Manual v2.0-2019
SATCUBE PROPRIETARY
SETTINGS |CONTROL
•
TRANSMISSION : Use MODE to turn transmission ON/OFF. CAUTION! Before turning on the
transmission, make sure no-one is standing in front of the terminal.
•
PORT: Switches between internal modem and optional external modem/device.
•
OVERRIDE : Enables the ability to disregard the terminal
transmission checks described in section 8 d) Transmission
Criteria. Tranmsit symbol in the bottom right corner will
change into the symbol in Figure 32.
•
MODEM POWER : Allows the user to turn the modem power
ON and OFF. Useful to power cycle the modem or turn the modem OFF in the case where an
external modem should be used.
•
RECEIVE QUALITY LIMIT (RQ) : Set the lower required limit to allow terminal transmission.
Used to make sure the terminal does not transmit unless pointed to a carrier. Recommended
value is 1-3 dB depending on satellite strength.
•
TX SYMBOL : TX symbol in top right-hand corner indicates when a transmission is active.
SETTINGS | SATELLITE
•
PRESET : To edit an existing profile, select its name in the drop-down menu. You can also add
new profiles. The CLEAR button clears the entire PRESET list.
•
NAME: Choose an appropriate name for the satellite profile in question.
Figure 31 Control page providing toggle switches for POWER, TRANSMISSION and receive quality limit.
Figure 32 When Override has
been enabled the transmit icon
changes into this figure