中文
EN
DE RU KO PT JA ES
02003
20
5. Temperature and Sound Settings of Soldering Station
Caution:
1
）
The real-time temperature setting is available only when the entered password is correct or the password
is the default one "000" . Otherwise, the temperature of the soldering station can be neither changed nor
calibrated.
2
）
If you turn off the power switch while setting the temperature, the set temperature will not be saved.
5.1 Temperature Setting Method
Temperature rise:
The set temperature will rise by 1
℃
by pressing the "
▲
" key, and the display window will display the set
temperature. After releasing the "
▲
" key, the display window will display the set temperature for about 2 seconds. If you
press the "
▲
" key within such delayed 2 seconds, the set temperature will rise by 1
℃
. If you press and hold the "
▲
" key
for at least one second , the set temperature will rise rapidly, and when the desired set temperature is reached, you can
release the "
▲
" key.
Temperature reduction:
The set temperature will drop by 1
℃
by pressing the "
▼
" key, and the display window will display
the set temperature. After releasing the "
▼
" key, the display window will display the set temperature for about 2 seconds.
If you press the "
▼
" key within such delayed 2 seconds, the set temperature will drop by 1
℃
. If you press and hold the
"
▼
" key for at least one second, the set temperature will drop rapidly, and when the desired set temperature is reached,
you can release the "
▼
" key.
Note: "5.1 Temperature Setting Method" only describes the method for setting temperature. If you want to save the current
set temperature, refer to 5.2.
5.2 Setting and Saving of Temperature Points
1
）
In working status, press the "
＊
" key twice to enter the temperature point setting window, which shows the
temperature set at the current temperature point.
2
）
After entering the temperature point window, press the "
＊
" key to switch between the three temperature points for
your selection as desired.
3
）
After selecting the temperature point, immediately press the "
▼
" or "
▼
" key to set its temperature.
4
）
To save the set temperature of the temperature point, be sure to press and hold the "
＊
" key after setting until the
window displays "
" , indicating that the temperature of the temperature point has been set.
5
）
When the setting is locked by a password, only temperature point selection is accessible, and you cannot set the
specific temperature
（
including the temperature of the temperature point
）
. The specific operation is as follows:
After entering the temperature point setting window, press the "
＊
" key to select the temperature point for working,
and then about 2 seconds after the "
＊
" key is released, the station returns to the working state, and will work at
such temperature point.
