6
Connecting the Scale to AC Power
The display and control unit is powered through the
scale’s power cord and power PCB.
§
Plug the power cord into a wall outlet (mains).
!
Make sure to observe the safety instructions.
Make sure that the voltage rating printed on this
unit is identical to your local line voltage. If the
voltage specified on the label or the plug design of
the power supply do not match the rating or stan-
dard you use, please contact your Sartorius office
or dealer. Use only original Sartorius power cables.
Use of cables from other manufacturers, even if
these units have a registered approval rating from
a national testing laboratory, requires the consent
of a qualified electrician.
$
If there is visible damage to the equipment or power
cord, unplug the equipment and lock it in a secure
place to ensure that it cannot be used for the time
being.
– Use only extension cords that meet the applicable
standards and have a protective grounding
conductor.
– Disconnecting the grounding conductor is
prohibited.
