10
3.
Add first component
+ 50.0 g
2.
Press the
U
key
(zero/tare; 3).
0.0 g
Example (Cumulative Weighing)
1.
Center an empty paint can
on the load plate.
+ 118.0 g
4.
Press the
L
key [MEM] (8)
STO 01
5.
Add the second component
+ 110.0 g
6.
Press the
L
key [MEM] (8)
STO 02
7.
Add the third component
+ 203.0 g
The required amount of
this component has been
exceeded by 3 g (= overpour).
8.
Press the
S
key (16) to start
the recalculation mode. A
C
(“Correction”) flashes on the
display.
9.
Press the
S
key (16) repeat-
edly to correct the value.
+ 200.0 g
10.
Press the
L
key [MEM]
key (8)
COR 01
11.
The readout shows the
amount of the first compo-
nent to be added, and “C1”
is shown in the upper right-
hand corner of the display.
–1.7 g.
12.
Add the first component
until the readout shows
0.0 g
13.
Press the
L
key [MEM] key
COR 02
14.
The readout shows the
amount of the second com-
ponent to be added, and
“C2” is displayed. – 2.0 g
15.
Add until 0.0 is displayed.
16.
Press the
L
key [MEM].
The scale returns to the for-
mulation program and the
“C”
is no longer displayed.
+ 200.0 g.
17.
Press the
c
key (7) [REC]
to view the factor by which
the total weight will exceed
the original target defined in
the recipe. (
C
= “Correction;”
in this example, 1.03).
Total weight = original
target
+
correction factor)
18.
Add remaining components
+1000.0 g
This concludes the
recalculation example.
