5
Getting Started
§
Unpack the scale carefully.
§
After unpacking the equipment, please check
it immediately for any visible damage.
Equipment Supplied
– Scale
– Load plate
– Adapter cable
Setting up the Scale
Choose a suitable location where your scale will not
be exposed to drafts, heat radiation, moisture or vibra-
tions. Make sure to read these operating instructions
carefully before connecting the scale to power.
!
Make sure to observe the safety instructions.
Leveling the Weighing Platform
Purpose:
– To compensate for uneven areas at the place of
installation
– To ensure that the equipment is placed in a perfectly
horizontal position for consistently reproducible
weighing results
Always level the weighing platform again any time after
it has been moved to a different location.
§
Level the weighing platform using the four leveling
feet. Turn the feet until the air bubble is centered
in the level indicator.
§
Check to ensure that all leveling feet rest securely
on the work surface.
> Each of the leveling feet must support an equal load.
> Adjusting the leveling feet:
To raise the weighing platform, extend the leveling
feet (turn counterclockwise). To lower the weighing
platform, retract the leveling feet (turn clockwise).
§
Place the load plate on the scale.
°C
