Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
G
Press the
Cal
soft key
> See “Calibration/Adjustment” for
further instructions
Toggling to the Next Application
G
Press
d
> See the section on the corresponding
application program for further
instructions
Setup (setting parameters)
G
Press
o
> See “Configuration” for further
instructions
Turning Off the Balance
G
Press
e
> The balance shuts off
> The display goes blank, then
OFF/Standby is displayed with
backlighting
58
Preparation
G
Turn on the balance: Press
e
> Sartorius logo is displayed
G
Select the Animal weighing application in the Setup menu: Press
o
§
Select
Application parameters
: press the
q
soft key 2
+
, then the
O
soft
key once
§
Select
Application 1 (basic settings)
: press the
O
soft key
§
Select
Animal weigh.
:
Q
or
q
soft key repeatedly
§
Confirm
Animal weigh.
:
O
soft key
Animal weighing
Animal activity
Calm
(Averaging)
Normal
Active
0.1% of animal/object
0.2% of animal/object
0.5% of animal/object
1% of animal/object
2% of animal/object
o
5% of animal/object
10% of animal/object
20% of animal/object
50% of animal/object
100% of animal/object
Start
Manual mode
o
Automatic mode
Minimum load for
None
automatic storage
10 display increments
20 display increments
50 display increments
o
100 display increments
200 display increments
500 display increments
1,000 display increments
Decimal places in
None
calculated result
1 decimal place
o
2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Printout
None
o
Average weight only
Average and calculated
o
= factory setting
see also the “Application Menu (Overview)” in the chapter entitled “Configuration”
§
Save settings and exit the Setup menu: Press the
oo
soft key
