Sartorius Cubis MCE11201S, Руководство по эксплуатации

Страница: 53 / 79

Operating Instructions Cubis
®
MCE 53
Operation
Calibration and Subsequent Adjustment
Requirements
− The weighing pan is unloaded.
− The operating display shows a stable weight value.
− The device is not locked against external calibration.
− Keep calibration weight ready for use.
Procedure
t
To set the external calibration in the menu: In the “SETUP” / “BALANCE”
menu, for the “CAL./ADJ.” parameter, select external calibration with
preset calibration weight or external calibration with user-defined
calibration weight as described above.
t
To set the sequence of the adjustment function to calibration and
subsequent automatic adjustment: In the “SETUP” / “BALANCE” menu,
for the “CAL.SEQ.” parameter, select the “ADJUST” configuration value.
t
Exit the menu.
t
Press the [Zero] key.
t
Press the [Adjust] button.
t
Place the indicated calibration weight on the balance. The device is
automatically adjusted after calibration, if the calibration weight placed
on the device is within the specified limits.
y
The [+] sign is shown if the applied weight is too high.
y
The [-] sign is shown if the applied weight is too low.
y
The [CAL.END] message indicates the end of calibration.
t
Remove the calibration weight after calibration is complete.
Manually Starting Adjustment after Calibration
Requirements
− The weighing pan is unloaded.
− The operating display shows a stable weight value.
− The device is not locked against external calibration.
Procedure
t
To set the external calibration in the menu: In the “SETUP” / “BALANCE””
menu, for the “CAL./ADJ.” parameter, select external calibration with
preset calibration weight or external calibration with user-defined
calibration weight as described above.
t
To set the sequence of the adjustment function to calibration without
subsequent automatic adjustment: In the “SETUP” / “BALANCE” menu,
for the “CAL.SEQ.” parameter, select the “CAL/ADJUST” configuration
value.
t
Exit the menu.
t
Press the [Zero] key.
t
Press the [Adjust] button.