54 Cubis
®
MCA Operating Instructions
System Settings
7.5.12 Parameters in the “Connections / SBI Protocol” Menu
Parameter
Settings
Explanation
Format
Value without header
The data output only exports the measured value without ID code .
Value (with header)*
The data output exports the measured value with ID codes .
Date & time, value (two
lines)
The data output exports the measured value, date, and time .
Output
Without stability*
The data is output without the weight value being stable .
With stability
The data is output only when the weight value is stable .
Automatic data
output
Off*
Deactivates the automatic data output . The data output must be triggered
by means of an SBI command with “ESC P” .
Each weight value
Starts the automatic data output with each value according to the display
result .
1 second
Starts the automatic data output every second .
2 seconds
Starts the automatic data output every 2 seconds .
5 seconds
Starts the automatic data output every 5 seconds .
10 seconds
Starts the automatic data output every 10 seconds .
30 seconds
Starts the automatic data output every 30 seconds .
60 seconds
Starts the automatic data output every 60 seconds .
* Factory setting
7.5.13 Parameters in the “Connections / Climate Module” Menu
Parameter
Settings
Explanation
Climate modules
7.5.14 Parameters in the “Connections / Connected Devices / Motion Sensor” Menu (Only for Connected Motion Sensors)
Parameter
Settings
Explanation
Number of gestures
2 gestures (left, right)*
Activates the control of functions with 2 gestures . Gestures: left, right .
4 gestures (left, right, up,
down)
Activates the control of functions with 4 gestures . Gestures: left, right,
down, up .
Any gesture
Activates the control of functions with any gesture .
Gesture to the left
Gesture to the right
Gesture upwards
Gesture downwards
Start/cancel taring
The gesture starts a taring process or cancels a taring process .
Start/cancel zeroing
The gesture starts the zeroing process or cancels the zeroing process .
* Factory setting
