Sartorius Combics CAH1, Руководство по эксплуатации

Страница: 74 / 168

74 Operating Instructions Combics Indicators
y
The LEDs next to the display indicate the results:
yellow LED: sample too heavy
green LED: sample in tolerance range
red LED: sample too light
p
t
Print the results.
Note: If automatic printout of results is enabled, you do not need to press the
p
key. The results are printed automatically.
Printout confi guration: see page 93
Setp + 1.250 kg
Target
Min + 1.240 kg
Minimum
Max + 1.280 kg
Maximum
G# + 1.256 kg
Gross weight
T + 0.000 kg
Tare weight
N + 1.256 kg
Net weight
Lim + 0.48 %
Percentage of deviation from target*
W.Diff+ 0.006 kg
Absolute deviation from target
-------------------
* When displayed in relation to target value:
If the weight is lighter than the target, the display shows: LL
If the weight is heavier than the target, the display shows: HH
Example 2
: Checkweighing samples with a target weight of 1250 g and a tolerance range
from –10 g to +30 g.
The tolerance values should be entered as a relative deviation from the target value.
Confi guration: The “Checkweighing” application is selected using the setting
INPUT
/
TAR.TOL
, a printout has been set up (see “Confi guration”).
O
t
Start target value and tolerance entry using the
O
key.
y
The target value symbol fl ashes at the top of the display.
t
Place a sample with the target weight (in this example, 1250 g) on the platform.
O
t
Save the target value.
y
The minimum symbol fl ashes at the top of the display.
Operation