Sartorius Combics CAH1, Руководство по эксплуатации

Страница: 37 / 168

Operating Instructions Combics Indicators 37
Operation
Weighing
This application is always available during operation.
Features: – Zeroing by pressing
(
– Storing the weight on the platform as a tare by pressing
)
– Tare container weight automatically
– Use a barcode scanner to enter tare weight (Combics 2)
– Use a 10-key keypad to enter tare weight (Combics 2)
– Delete tare values using the numeric entry
0
and
)
/
c
and
)
(Combics 2)
– Toggle the display using
k
between:
– Combics 1: Gross and net values
– 1st and 2nd weight unit or
– Combics 1: Normal and 10-fold higher resolution
– Weighing with two weighing platforms (for Combics 2 only)
– Individual numeric ID codes for weight values (Combics 2)
– Print weight value:
– GMP-compliant printout
– Automatic printout
– Automatic data output (see Data Interfaces chapter)
Automatic taring
(
APPLIC.
menu item 3.7):
When the menu item is active (3.7.2), the fi rst weight on the scale that exceeds the
preset minimum load is stored in the tare memory at stability.
The scale returns to the initial state when the load on the scale is less than 50% of
the minimum load.
Minimum load for automatic taring and automatic printing
(menu item 3.5):
You can set the following for the minimum load:
1 digit (no minimum load)
2 digits
5 digits
10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
The “digits” here refer to the scale intervals for the connected weighing platform.
If the interval is 1 g and 1000 digits are required, the minimum load is 1000 g
(1000 intervals).
If the weighing platform interval is 5 g and the same number of digits as above are
required, the minimum load is 5000 g.
When the load exceeds the minimum load limit, the weighing platform is tared
automatically and/or a report printout is generated automatically; however, this
requires the corresponding menu items are active for automatic taring (menu item
3.7.2) and for automatic printing (menu 7.15.2).
Operation