Sartorius BioPAT Xgas Vis Скачать руководство пользователя страница 19

Страница: 19 / 79

Operating Manual BioPAT

Xgas Vis

Software Installation

5.2 BioPAT

Xgas Vis Software

This chapter describes the installation of the BioPAT

Xgas Vis Software.

NOTE

Please consider that MFCS/win must have been already installed.
Please note, the installation of this software requires local administrative
rights.

The CD-ROM containing the BioPAT

Xgas Vis Software is labeled as

“BioPAT

Xgas Vis Soft ware”. A separate program named SETUP.EXE

performs the software installation.
The following steps describe the installation on your computer system.

Installing the BioPAT

Xgas Vis Software

Shutdown the MFCS/win system from the MFCS/win Shell.

Insert the CD-ROM into the CD drive.

Open the windows explorer and change to the CD drive.

Double-click on file SETUP.EXE to start the installation program.

If the “.Net Framework 3.5” is not installed, then the following dialog
will be shown on the screen.

Содержание BioPAT Xgas Vis
















































































Результаты поиска

Содержание BioPAT Xgas Vis

Отзывы:

Бренды по названию

Популярные бренды

Sartorius BioPAT Xgas Vis, Руководство по эксплуатации

Результаты поиска

Содержание BioPAT Xgas Vis

Отзывы:

Бренды по названию

Популярные бренды