Sartorius stedim Sartoclear Pilot Filter Holder, Руководство по эксплуатации

Страница: 17 / 35

Sartoclear
®
Pilot Filter Holder 17
Operation
5 Operation
5.1 Moving Holding Clamps
Procedure
t
Pull the holding clamp (1) halfway up .
t
Move the holding clamp (1) along the pull rod to the desired position .
t
Allow the holding clamp (1) to fall to the desired depth .
y
The holding clamp is in the new position .
5.2 Operating the Hydraulic Pump
5.2.1 Releasing the Hydraulic Pump
Prerequisites
− The hydraulic pump is operational (see Chapter "4 .6 Starting up the Hydraulic
Pump", page 16) .
Procedure
t
Turn the needle valve clockwise . This closes the needle valve of the hydraulic
cylinder .
t
NOTICE Danger of damage to the hydraulic pump due to retained pressure in the
hydraulic piston of the hydraulic pump! Release the hydraulic pump after the
filter cartridge is compressed .
t
Open the release valve on the hydraulic pump . To do so, turn the release valve
counterclockwise .
y
This builds up pressure in the hydraulic piston .
t
CAUTION Danger of injury due to upright pump lever! Push the pump lever
down into its original position .
1
1
1