Sartoclear
®
Pilot Filter Holder
11
Equipment Description
3.3 Hydraulic Pump with Pressure Gauge
Fig . 3-3:
3
4
1
2
Hydraulic system
Pos. Description
1
Pump lever
2
Pressure gauge
3
Release valve
4
Needle valve
3.4 Manifold Plates
The manifold plates rest against the pressure and clamping plates . The filter
cartridges are seated between the manifold plates . Filtration is not possible
without manifold plates .
3.5 Clamping Plate
The clamping plate is fastened on to the pull rods by the holding clamps .
The position of the clamping plate depends on the number of installed filter
cartridges .
3.6 Pressure Plate
By moving out the hydraulic cylinder, the pressure plate is pressed against the
inserted filter cartridges and the clamping plate .
3.7 Holding Clamps
The base and clamping plates are fixed to the pull rods via the holding clamps .
3.8 Baffle Plate
The baffle plate is used to install pressure sensors .
