10
Lift the holder out
5.5
5.5
5.5
5.5
How to remove the hose
How to remove the hose
How to remove the hose
How to remove the hose
1. First remove the used blade and discard.
2. Open both tube holders
3. Remove the tubing and discard the cut ends.
4. Close the cover to reset the unit to the start position
5.6
5.6
5.6
5.6
How to change the tube holders
How to change the tube holders
How to change the tube holders
How to change the tube holders
The tubing holders can be quickly changed to connect different diameter tubing.
The holders must be changed as a set (Left and Right holders).
Removing the holders:
1. Open the cover and both tube holders.
2. Take out both lower halves of the tube holders
3. Take out both upper halves of the tube holders
Installing the holders:
1. Open the cover.
2. Set both upper halves, then both lower halfs of the tube holders.
The tube holders are coded, the unit recognizes automatically the holder type
and chooses the correct program.
Please insert only a well matched set. Check also Appendix 1 with standard
holders. Check also the hose program on the display.
