6
Optional Pedestal Mounting
1. First mount the electric pump on the pedestal using supplied hard-
ware. Ensure 2 spacers are installed between the pedestal and
the electric pump cabinet. Tighten four bolts.
2. Pedestal mounting requires an existing power line in the floor.
Locate pedestal at power source. The power is designed to go
through the pedestal and into the electric pump enclosure. (see
setbacks).
3. Use a marker or pencil to outline the holes of the flange onto the
base material. We recommend checking the hole locations after
each new anchor is placed. Ensure the holes are at least 6” away
from any cracks in the base material.
4. The drop in anchor is a female anchor designed for use in solid
concrete only and can’t be used in brick or block base material.
The anchor size is designated by the inside diameter of the anchor.
The Saris Infrastructure electric pump pedestal comes with 3/8”-
16 anchors. The diameter of the hole to be drilled is the same size
as the outside diameter of the anchor which is ½”. (Figure 4)
Figure 3
Figure 4
