5
Wall Mounting or Vending Machine Mounting
Figure 2
1. Identify mounting location. Be sure to follow setbacks. The base of the electric pump should be mounted great-
er than 37” from the ground. If installing on a vending machine, mount in a position that does not inhibit the
door opening (we usually mount on the left side of the machine).
2. Choose your mounting surface and fasteners. If mounting to sheet metal, we recommend using #14 sheet metal
screws no longer than 3/4”. If mounting into concrete, we recommend using a ¼” masonry screw. If mounting
into wood framing, we recommend using #14 wood screws.
3. Before installing the screws, install the rubber backed washers with the sheet metal screws to prevent water
intrusion. Be careful not to over tighten the screws during install.
