TA2020B & IR2110B Installation Guide
2
Safety Notices
1) Please read all instructions before installing and powering the unit. You should keep
these instructions in a safe place for future reference.
2) The TA2020B and IR2110B use a 12V DC/1.5A power supply (mains adapter). If the
mains adapter shows signs of damage or malfunction, you should stop using it
immediately - turn off the power at the mains and disconnect it from the mains supply
before contacting your supplier for a repair or replacement.
3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Use only the
accessories, attachments, and power supplies provided by the manufacturer –
connecting non-approved antennas or power supplies may damage the unit, cause
interference or create an electric shock hazard, and will void your warranty.
4) Do not attempt to repair the product. The unit contains no electronic components that
can be serviced or replaced by the user. Any attempt to service or repair the unit by
the user will void the product warranty.
5) The TA2020B and IR2110B are designed for indoor use only and should be used in
an environment that is suitable for computers and other electronic equipment.
6) Ports that are capable of connecting to other apparatus are defined as SELV ports.
To ensure conformity with EN60950 ensure that these ports are only connected to
ports of the same type on other apparatus.
TA2020B & IR2110B Installation Guide
3
Preface
This guide describes the installation procedure for the TA2020B and IR2110B. It is
intended to provide sufficient information for you to be able to connect the unit to your
terminal equipment and power supply. A complete reference guide to the software
features that are available on the product is available separately in PDF format that can
be downloaded from the Sarian Systems website (
www.sarian.co.uk
).
Both models feature:
♦
1 x RS232 sync/async serial ports (25-way D)
♦
1 x RS232 async serial port (9-way D)
♦
1 x ISDN BRI interface
In addition to the above, the IR2110B also incorporates a 10/100-BaseT Ethernet port.
Package Contents
When you receive the router carefully unpack it and check the contents. These should
include:
♦
TA2020B or IR2110B system unit (one of the following models) :
81-TA2020B-SSEU-00
81-IR2110B-SSEU-00
♦
100V-230VAC, 50 - 60/13A – 12V DC mains adapter
♦
this Installation Guide
♦
2M CAT5 LAN cable (IR2110B only)
If any item is missing or damaged, please contact your supplier. You should also make a
record of any damage that may have occurred during shipping and report it to the carrier.
