manualshive.com logo in svg

Sargent and Greenleaf 3007 Direct Drive, Руководство по эксплуатации, Страница: 12 / 12

Поделиться
Скачать
Sargent and Greenleaf 3007 Direct Drive Скачать руководство пользователя страница 12

4.1—Flash Drive Specification

•

   Flash drive to be USB 2.0 certified and that meet MSD Class certifications.

•   Flash drive to be formatted to FAT32 file system.
•   Flash drive to be formatted with the Default Allocation Unit size for the

     drive capacity.
•   Only flash memory type devices should be used.
•   Preference for OEM grade flash drives.

NOTES

•   Reliability of the download process cannot be guaranteed for those drives   

     that do not meet this specification.
•   The speed of the download process may vary greatly depending on the size  

     and type of flash drive that is used.
•   Flash drives that have been designed with built-in encryption or other  

     security features will not work as expected with the USB Audit Lock 2.0.

     These drives typically require additional input from the end-user before they

     can be used and this is not available through the keypad.

S&G Confidential 

The information contained in this document is proprietary to Sargent & Greenleaf, Inc. 
Publication or duplication of this copyrighted document is strictly prohibited.

   

 

 

 

                         

S&G Audit Lock Electronic Safe Lock

Limited Warranty

Sargent & Greenleaf, Inc.

A Wholly Owned Subsidiary of Stanley Security Solutions, Inc.

PO Box 930

Nicholasville, KY 40356

Phone: (800)-826-7652 Fax: (800)-634-4843
Phone: (859)-885-9411 Fax: (859)-887-2057

Sargent & Greenleaf S.A.

9, Chemin du Croset

1024 Ecublens, Switzerland

Phone: +41-21 694 34 00

Fax: +41-21 694 34 09

12

Содержание 3007 Direct Drive













Отзывы:

Нет отзывов