SAPIRHOME Z-1814-B, Инструкция по эксплуатации

Страница: 6 / 21

_ English _
CLEANING THE SHAVER
First cleaning method, common and simple cleaning:
1. Press the release button on front of shaver and open the head assembly. (Diagram 7)
2. Tap out excess hair shavings. (Diagram 8)
3. Rinse the head of the shaver under running water. (Diagram 9)
4. Close the head assembly after cleaning. (Diagram 10)
Second cleaning method, deep cleaning:
Generally, the shaver head should be deeply cleaned after using for 30 times (300 minutes), it is
in favor of use life of head and the efficient shaving.
1. Perform the daily cleaning steps 1 and 2.
2. Place a drop of liquid soap on the inside near each cutter. (Diagram 11)
3. Brush the soap out thoroughly with the supplied cleaning brush. (Diagram 12)
4. Detach the head, unscrew the lock according to the direction marked in the lock (Diagram 13),
then remove the lock bracket (Diagram 14), remove and separate each head assembly one by
one (Diagram 15, Diagram 16), then clean the suds and hair residue with cleaning brush and
water, install the head assembly according to above reverse steps, cover the head assembly to
complete deep cleaning.
Additional remark: Clean the shaver with liquid soap after separating each component
according to above steps.
OTHER INSTRUCTIONS FOR USE
When your rechargeable shaver reaches the end of its useful life, the batteries must be removed from
the shaver and be recycled or disposed of properly in accordance with your state and local
requirements
The method to disassemble shaver and take out the battery is shown on Diagram 19, you may need a
pair of tongs and a crosshead screwdriver to complete the disassembling of shaver.
Caution! Do not put in fire or mutilate your batteries when disposing as they may burst and
release toxic materials.
It is very important to replace your head and cutters when necessary to ensure a close,
comfortable shave without irritation. Here are some signs of head and cutter wear, indicating
that replacement is needed:
1. Irritation: As the heads get excessively worn you may experience some skin irritation. Please
do not use it again, replace the head. (Irritation feeling at first time is exception, your skin may
not be accustomed to the new shaving method.)
2. Pulling: When the cutters wear you may feel a sense of pulling and a loss of closeness when
you shave. This is an indication that it is time to replace our heads and cutters.