Sapcon Vital Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 13

Sapcon Vital Скачать руководство пользователя страница 7

User Manual & Datasheet V 2.3

7

Mechanical Specifications

Please refer to Table 3 for Mechanical Specifications.

PARAMETER

VALUE

Housing

•

SCUTE: Pressure die-cast aluminium weatherproof
(Rating IP-68)

•

FP2C: Cast aluminium, weatherproof & flameproof,
powder coated, suitable for Gas Groups IIA, IIB & IIC
as per IS-2148

Electrical Connector

PG-13.5, 1/2" BSP DC Glands, 1/2” NPT DC Glands

Mounting

•

Screwed - 1”/1 1/2” BSP/NTP(M)

•

Flanged - As per your specifications

•

Material - MS (Plated), SS

Sensing Fork

SS 316

Extension Pipe

GI (Galvanized Iron) / SS-304 / SS -316

Table 3: Mechanical Specifications

8

Installation & Handling Guidelines

The fork should be installed in horizontal or vertical position. The following image displays different allowable installation

positions. Observe that when installed directly under the material inlet source, a canopy called baffle of appropriate strength
and size should be welded right above the fork as shown.
While installing the instrument, please take care of the following points:

•

The instrument shouldn’t block the material filling inlet.

•

Secure the cover of housing tightly. Tighten the cable glands.

•

For side-mounting, provide a baffle to prevent the application material from falling on the fork.
Please refer to Figure 3.

Figure 3: Correct Side Mounting

•

When handling forks, do not lift them using their tines. Please see Figure 4.

•

The tines should not be bent and neither should their dimensions be altered. Deforming the shape of the tines may
interfere with the fork’s operating frequency. Please see Figure 4.

•

Make all electrical connections as instructed in the manual. Don’t power on the device before verifying the connections.

•

To prevent the ingress of moisture and water seepage in side mounting position, the cable entries should always point
downwards.

Sapcon Instruments Pvt.Ltd.

R

7

«
...
5
6
7
8
9
...
»

Содержание Vital














Отзывы:

Нет отзывов