19
Using your TV
3.
A u t o :
I f y o u r A P ( A c c e s s P o i n t ) s u p p o r t s
WPS(WiFi Protected Setup), you can connect
to the network via PIN(Personal Identification
Number) or PBC(Push Button Configuration).
WPS will automatically configure the SSID and
WPA key in either mode.
Select
Wireless settings > Auto
and press
OK
to enter.
•
PIN
: Select
PIN
and press
OK
to enter. Choose
a random
PIN
code. Make sure this code is
installed on the AP. (For the procedures, refer
to your router manual.) Select
OK
and press
OK
to set up the connection.
•
PBC
: If your router has a PBC push button,
select
PBC
and press
OK
to enter. Press
the PBC push button on your router within 2
minutes before you select
OK
and press
OK
again. Your TV will automatically acquire all the
network setting values it needs and connect to
your network.
Information:
Select
Information
and press
OK
to enter. You will
check the information on current connection, such
as
Interface, Address type, IP address
, etc., press
to return to the
Network
menu.
Connection test:
Select
Connection test
and press
OK
to enter. You
will check the Internet connectivity.
System
Select
MENU > System
, then the
System
menu
appears on the right with the following options. Press
►
to enter and use ▲/▼ to choose an option.
Timer:
The
Timer
menu allows you to set the time
zone on your TV set, to program an automatic turn-off
or wake-up timer .
Select
System > Timer
and press
OK
Timer
options are as below:
•
Time zone:
Use
▲/▼
to select the local time
zone.
•
Clock:
Press
OK
to display its options:
Auto Synchronization: Use
▲/▼
to select on
or off Manual. If on is selected, the TV will get
the time automatically cannot be adjusted. If
you select Manual, you should set date and
time at Date and Time item.Highlight Date or
Time,then use 0-9 buttons to change the date
or time.
Note:
Time option will not be memorized when
turning on the TV next time, and the TV 's
time will start from the default.
• Power on timer: Use
▲
/
▼
to select Once,
Daily or Off. If you select Once or Daily, you
should set a time period after which the TV
automatically switches to on at Time below
this item. Highlight Time,then use 0-9 buttons
to change the time.
•
Power off timer: Use
▲/▼
to select Once,
Daily or Off. If you select Once or Daily, you
should set a time period after which the TV
automatically switches to off at Time below
this item. Highlight Time,then use 0-9 buttons
to change the time.
•
Sleep timer:
Sets a period of time after which
the TV set goes into standby mode. Use
▲/▼
to set the period (120 minutes maximum). To
disable this function, select
Off
.
•
Auto standby:
Sets a period of time after which
the TV set goes into standby mode. Use
▲/▼
to set the period. To disable this function, select
Off
.
Lock:
This menu can control the special function for
TV channels.
Note:
You must enter your personal code before
entering the
Lock
menu.
Select
System > Lock
and press
OK
The factory
Then press remote number keys to enter password
to enter lock menu.
default code is
1234.
And the super password is
0423
.
If you forget your code, enter it to override any existing
codes.
Menu language
:
Press OK /
► to enter
and use ▲/▼ to
choose an option.
•
Language:
Select your desired OSD Language.
•
Preferred audio Language:
Select your desired
Preferred audio
Language.
•
Preferred audio Language 2nd:
Select your desired
Second Preferred audio
Language.
Picture
Sound
System
Network
Smart TV
Channel
Support
Auto source
On >
Location
Home >
Timer
Lock
Input settings
Sports mode
Off >
Instant power on
On >
Restore Factory Default
Menu language
T-Link
Off >
