Sanyo Xacti VPC-SH1, Инструкция по эксплуатации

Страница: 113 / 211

English
92
NO
RM
A
L
/S
H
O
O
T
IN
G
RECORDING MENU 2
Motion compensation (image stabilizer) setting
Your camera can minimize a jittery picture by compensating for unintentional
hand motion.
HINT
If the motion compensation does not seem to be working...
i
Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i
If the digital zoom (page 69) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
i
When the scene select function is set to night view portrait
/
or lamp
Q
, the motion compensation effect may be insignificant.
Can’t set the “photo stabilizer” setting?
i
The photo stabilizer is automatically turned off
]
after any of the
following operations.
h
Setting the exposure to
T
,
g
or
H
(pages 52 and 97).
h
Setting the still image NR (noise reduction) setting (page 130) to “ON”.
h
Starting video clip recording.
h
Setting the camera to the sequential shots mode (pages 48 and 89).
When motion compensation is enabled,
i
The following icons are shown on the monitor:
Did the scene select setting change?
i
When the photo stabilizer is set to
\
, if the scene select setting is
+
, it
will automatically change to
=
.
000:00:22
Full-HD
The video stabilizer is active
The photo stabilizer is active
Both the video stabilizer and the photo stabilizer are
active