manualshive.com logo in svg

Sanyo VPC-MZ3, Инструкция по эксплуатации, Страница: 139 / 218

Поделиться
Скачать
Sanyo VPC-MZ3 Скачать руководство пользователя страница 139

5

Press the SET button.

œ

Voice memo recording starts. Talk
into the microphone on the digital
camera.

œ

The sound will be recorded for
about 4 seconds.

œ

While the voice memo is being
recorded, RECORDING and 

K

are displayed.

œ

When recording is finished, you are
returned to the Edit Photo Screen.

œ

For images with a voice memo
added, the volume icon 

N

 is

shown on the Playback Setting
Screen.

HINT

œ

For still images, you can also add a voice memo immediately after
capturing an image (see page 104).

œ

After a voice memo has been added to an image, you cannot erase only
the voice memo. When the image is erased, the attached voice memo is
also erased.

œ

If a voice memo is added to an image that already has a voice memo, the
new recording will replace the previous one.

Microphone

ADD AUDIO

      RECORDING

SX612/EX, GX, U (VPC-MZ3 GB2)  Thu. Sept., 05/2002

English

 136

Содержание VPC-MZ3



























































































































































































































Отзывы:

Нет отзывов