Sanyo VPC-E60, Инструкция по эксплуатации, Страница: 96 / 185

English
90
4
Toggle the SET button up to select “YES”, and press the SET button.
<ONE ERASE>
h
The currently displayed image is deleted.
h
To erase other data, select the data, and press the SET button.
<ERASE ALL>
h
The Erase Confirmation Screen again appears. To erase the data,
select “YES”, and press the SET button. When data erase is
completed, “NO IMAGE” is shown.
CAUTION
About protected images
i
Data which is protected from accidental erase cannot be erased. To erase
protected data, set the protect setting for the data to off (page 87), and
then follow the data erase procedure.
The schedule shot is also erased.
i
If captured still images were entered in the schedule, the images will also
be deleted from the schedule when the image data is erased. Please take
note of this especially when choosing the “ERASE ALL” mode.
i
You can also access the One Erase Confirmation Screen from the
Playback Screen by toggling the SET button up.