Sanyo VPC-E1600TP, Инструкция по эксплуатации

Страница: 103 / 113

102
damage the power cord and
cause a fire or electric shock.
• If the power cord is
damaged, or if it does not
plug properly into the
docking station, AC
adaptor/charger or wall
outlet, contact the place of
purchase.
■
Cautions concerning the
power cord
• Do not leave the power cord
plugged into an electrical
outlet while the other end is
not plugged into the AC
adaptor/charger. The loose
end can cause electrocution
if touched with wet hands or
if handled by children.
• Use only the supplied power
cord. If a different power
cord is used, it may be rated
for a different current load,
and that may cause a fire.
• The supplied power cord is
for exclusive use with the AC
adaptor/charger supplied
with your camera. Do not
use it with other devices, as
doing so may cause a fire or
electric shock.
• Do not use a bundled power
cord, as the heat generated
may cause a fire.
■
Do not touch the power
cord plug with wet
hands
• Doing so may cause an
electric shock.
CAUTION
■
Do not hold the hot part
for a long time
• The device(s) may become
warm during use. A low
temperature burn may result if
you hold the hot part for a
long time.
■
Do not place on an
unstable surface
• If may fall, resulting in damage
or injury.
• If the device has fallen or has
been trampled on, and its
body is damaged, turn it off,
remove the battery, and take it
to the dealer for repair. Using
the device after its body has
been damaged may cause a
fire or electric shock.
■
Other cautions
• Use only the supplied or
specified docking station and
AC adaptor/charger with your
camera.
• If a docking station or AC
adaptor/charger other than
the ones specified is used, it
may damage the camera and
cause a fire or electric shock.
Use the supplied or specified
docking station and AC
adaptor/charger only with the
specified camera. Do not
connect to other cameras, as
doing so may result in
damage.