Sanyo VPC-E1600TP, Инструкция по эксплуатации

Страница: 36 / 113

35
Setting the Drive Mode
Your camera features a Self-timer and Burst which can be set in the Drive mode function on the screen.
The Self-timer allows you to take images after a pre-defined delay. While burst lets you take
consecutive shots. This function is only available in recording still images. The Drive mode setting is
automatically set to off when you turn off the camera.
To activate Drive mode:
• Tap the onscreen Drive button to display
the popup drive mode menu and tap the
desired icon.
The table below shows the available Drive mode settings.
Icon Item Description
10 Sec. Sets a 10-second delay to capture image after pressing the shutter button.
2 Sec. Sets a 2-second delay to capture image after pressing the shutter button.
Double
Performs delay and capture twice:
Performs a 10-second delay, then captures the image.
Performs another 2-second delay then captures the image again.
Burst
Performs continuous shooting when the shutter button is pressed.
Stops shooting when the shutter button is released.
Speedy Burst
Captures 30 images in a shot when the shutter button is pressed.
Auto set Image size to VGA only.
Off Captures an image without time delay.
Tap operation is disabled during drive mode.