PENCAM
User’s manual
Live Recording in Every Situation
MT4032
Introduction
MT4032 is a cutting-edge camera built-in a pen. You can
take pictures, save video fi les with sound, use it as a we-
bcam in Skype. Files are stored on microSD fl ashcard, you
can download them directly from fl ashcard or through
pen connected by USB cable.
Note! Before fi rst use fully charge the device.
Charging
Unscrew the pen in half of its length. Use included USB ca-
ble to plug it to USB port in PC computer. During charging
red LED is on, full charging takes ca. 4 hours. After charg-
ing unplug USB cable and screw together both parts.
Installing microSD card
Unscrew the pen in half of its length. Put microSD into card
slot, note that fl ashcard connection pins should facing
mini USB port. Now screw together both parts.
Using pen
To make notes twist on silver ending of pen, after use twist
off to hide pen inside.
Switching modes
Press and hold ON/OFF button for about 2 sec, red LED
indicator will be on constantly. Device is now in snapshot
mode.
Next press and hold ON/OFF button for about 2 sec, red
LED indicator will fast blink 3 times. Device is now in video
mode and will record video fi le instantly.
Next press ON/OFF button to save video fi le and go to
snapshot mode.
Next press and hold ON/OFF button for about 3 sec, red
LED indicator will go off . Device is now in off mode.
Note! If no action is taken within 30 sec from switching
mode the device will automatically go to off mode.
Taking pictures
When device is in snapshot mode press shortly ON/OFF
button. Every time you press it the device is saving a pic-
ture on microSD card.
Recording video
When you have switched from snapshot mode to video
mode the device will record video instantly. To stop record
press shortly ON/OFF button. To start recording next video
fi le press and hold again ON/OFF button for 2 sec - red LED
indicator will blink fast 3 times to confi rm recording next fi le.
Connecting to PC computer
Data storage mode
When MT4032 is in off mode unscrew the pen and con-
nect it to the PC computer using USB cable included in
package. System will automatically install the device as an
USB mass storage device. You can copy all fi les from pen to
windows desktop.
Webcam mode
Insert software disk into CD-ROM drive and run driver
installation. When fi nished plug MT4032 to PC using USB
cable and press ON/OFF button. Windows will install new
capture video device. In webcam mode only video is ena-
bled, microphone function is disabled – use external input
audio device for skype calls. Press again ON/OFF button to
exit to data storage mode.
Setting data and time
To set actual date and time you need to copy fi le “TAG.TXT”
to root folder of MT4032 in data storage mode. Copy “TAG.
TXT” from software disc to desktop and edit in windows
notepad. File contains lines as below:
[date]
2009/08/24
19:20:00
Modify appropriate lines to actual date and time, save it,
and then copy into root folder of MT4032 in data storage
mode.
Next unplug USB cable and wait until LED indicator goes
off . Now turn on MT4032 – new time settings will be ap-
plied.
Note! MicroSD card must be installed in MT4032.
Reset
If you encounter strange behavior of the device you can
put straighten paper clip into “reset hole” to restart the
device.
EN
ON/OFF
Camera
Microphone
USB Port
Card slot
Indicator
Reset button
